The Next Episode: SRAM Eagle Transmission

I have to admit - we have it pretty good with today's mountain bikes, and the products that hang from them. Everything is pretty damn dialed, and reliable too. Things have really come on in the last 10 years and I'd say one of the big driving factors behind that was the introduction of the 1by drivetrain.

 

Eleven years ago, SRAM shook up the mountain biking world when they released their new-to-the-world XX1 groupset; the first 1by dedicated groupset. It was gorgeous; the narrow wide chainring blew people's minds. I remember looking at the cassette and thinking, ‘holy shit, you could eat your dinner off that, it’s so big’. Mind you, that was a measly 42t compared to today's 52t cassette. That groupset really did change the game.

 
 

Now, 11 years later, SRAM is back at it. Disrupting the normal; rewriting the rule books - and changing the game for the future. Enter, the new XX1 SL, XX1 and X01.

 

SRAM has gone back to the drawing board and reimagined the way the derailleur mounts to the frame. Gone is the hanger. In its place, a clevis mount derailleur. The new system is designed to work on bikes that use a SRAM UDH hanger interface.

 

A couple of years ago, SRAM brought out the UDH (universe derailleur hanger). The purpose of it was to create a better derailleur hanger, that other bike brands could adopt. It was a standard that made sense and, slowly, more and more bike brands have been getting on board with the standard. It was a really good move forward for the bike industry. This new AXS system builds on top of that. The hanger is replaced by a direct mount clevis on the frame. By making this change, you massively increase the stiffness and strength of the derailleur. It's not just held by a single bolt to the hanger; instead, it mounts both sides of the frame. When you induce the hub, frame and axle it creates an interface that is incredibly stiff and really strong, so much so that you can put your bike on the ground, stand on the derailleur on one foot then get back on your bike, ride away and the shifting will still be perfect. That's not possible on a normal hanger set-up - something will bend. I had my doubts about it until Chris showed us - it was super impressive.

 
 

The derailleur keeps the override clutch system that lets the mech move out of the way. It’s fantastic, and something that seems to get used regularly on my current GX AXS. It's saved my hanger from getting bent so many times and I’ve never needed to straighten it like I would have with a normal cable set-up. The clevis mount, combined with the override clutch, gives you a system that should (in theory) be very hard to put out of tune. Overall, it’s a much more reliable system with more pierce gear shifting offering a better experience on the trail.

 

SRAM has also introduced other technology to these groupsets: flat-top chains that come from their road bike groupsets. These increase efficiency and durability whilst looking flipping awesome. X Sync can now be seen on the cassette, improving the shifting and chain reaction. It really lets you shift under load without the worry of skipping gears. I’d imagine it also helps with the durability of the cassette. The recent SRAM x Dome cassettes have incredible wear life if you replace the chain regularly. I think these new ones will blow them out of the water, as long as you keep up-to-date on replacing the chain when it's worn.

 

The smart engineers at SRAM Germany really went to town on this, and have gone over everything with a fine-toothed comb. Chris Mandell (SRAM PR) told us that they looked at all the warranty data they had collected over the last 10 years and tried to eliminate as many of the issues as they could. The way to do this was to redesign the whole system and imagine a new way of doing things. The clevis mount gave the ability to produce a far superior product and gave the engineers more ability to optimise every last bit. There are so many little things they have done that all add up and just make it a joy to use - such as the slight bend in the derailleur cage. It looked like it had been bent on the trail but in actual fact, it was supposed to be like that. It helps keep the pulley chain interface better aligned when at the extreme ends of the cassette. There are two different modes to set the cage to, depending on the chainstay length, along with many other little things which have been optimised to create an overall better product.

 
 

Set up has become easier than ever before. I won’t go into exactly how you go about it - the SRAM technical manuals have that all dialed and are a great source of information.

 

“We gave this product out to some of our racers this year, on the EWS, and the mechanics keep overthinking the setting up of the system,” explained Chris. “They keep telling us: ‘it can't be this easy!’”. Easier setup leads to fewer problems and fewer tuning errors from the get-go.

 

Now, I imagine you're thinking; ‘that's all well and good, but what happens if I crash and absolutely smash it into a rock and manage to bend it?’. Well, yes. Shit does happen, obviously. In that case, on a normal hanger mech situation, both of them would probably be a full write-off and due for the bin. In the case of this new system, well, I'd be very surprised if you were able to bend the clevis. It is truly that strong and stiff. The good news is that the rest of the derailleurs are rebuildable. If you do damage a part, it will most probably be replaceable. You can remove the cage without using any tool. A simple little ‘tap’ while unscrewing the cage will loosen it up. The tension spring and clutch are now built into the cage, so servicing and cleaning these parts has become super easy and something that can be done in no time. The face plates of the parallelogram are replaceable as well. Is your mech looking a bit scratched up and tired after a year of use and abuse? Simply slap some new ones on, and it will look brand new. I’m really behind this - I love when brands make their products rebuildable and serviceable; products that they want to see being used for years and years; products that you can fix rather than just replace. It is the way our industry should be heading, rather than adding to a ‘throwaway society’ just because one tiny part breaks or wears out.

 
 

The derailleur looks slick – it’s futuristic looking, almost taking some of that cyberpunk aesthetic and feel that Hyundai is using in their cars. There are sharp lines throughout, highlighted by the brushed alloy metal on the black derailleur. It’s a solid unit of a mech and it looks like you could take this thing through the gates of hell and come out unscathed. The new cassette is a work of art as well. As you looked closer, you realise SRAM have added X Sync to the cassette as well. Mind-blowing stuff. The new shifter - or pods as SRAM refer to them as – have a more traditional, ergonomic design compared to the previous generation. It uses a two-button system, one placed above the other. The rubber paddles require a push, making them feel like a shift versus a tap. The return spring built into the paddle gives you that positive, almost mechanical, feel. Personally, though, the pièce de résistance was the new XO cranks. They are gorgeous. A change from carbon to alloy, they are unlike anything else on the market (well, minus 5DEV). They're minimalist, cyberpunky and abstract. You can tell they used what they learned from their AI crank program and applied it to this. There’s a hole near the crank bolt, highlighted by the brushed metal accent that gives the look of a drawing compass. The bushed metal has been placed in the part of the crank where you’re most likely to get foot rub, thus keeping the crank looking brand new for years, for us chronic shoe crank pedal rubbers. The final piece that set these off, is the return of the bash guard. Why these ever feel out of fashion I do not know, but I’m so glad to see them back. They mount on the chainring and can be removed if you see fit. I’m such a fan of these.

 

From the first shift, you realise this is something special - it’s not just another groupset, another new drive chain. It’s more than that. It's the crispest shifting I've ever experienced. It has such a positive feel to it. There is that reassuring ‘clunk’ as it moves into gear - almost mechanical, but with the precision of electronics. It’s lightning fast; instant, and precise. Even under load, in the worst possible moment to shift, it was still absolutely light years ahead of everything else. Everything you have learned about not shifting under load, you can now throw out the window; this new system does it with ease. I think a big factor of this is due to the added stiffness of the direct mount and the X Sync teeth on the cassette, but SRAM has also made a lot of tiny tweaks that have really optimised the system.

 
 


 

 

 

 

The more I rode the product, the more I liked using it - it's an absolute joy to use. You just know that when you push the button to shift, it will do it – there’s no worrying about a little under-power half pedal to help it shift. Just pedal as you would, and the chain will shift on the cog. It really does improve the enjoyment of climbing. The slightly altered rations in the cassette were also a welcomed improvement. No more big jumps between the 42t to 52t. Instead, you 44 - 52 jump and it feels a lot nicer. It doesn’t sound like a lot, but it makes a difference, with less of a sudden change in ratio. It's hard to put into words the feeling of the drive chain over the previous stuff; overall you’ll just have a much nicer time while shifting. A good analogy would be comparing driving a car from ten years ago to driving a brand new, modern car with all the bells and whistles. Both do the same thing, but the newer car is going to be easier and arguably more enjoyable to drive; more relaxing, quieter, with more features to assist you.

 

SRAM has really knocked it out of the park with this. It’s hard to think about how you can improve on what they have delivered here. It’s truly fantastic. It’s robust, designed from the ground up for mountain biking, and is finally moving on from the hanger system that came from road bikes so many years ago. I’m a massive fan of the ability to be able to rebuild and replace the parts on the derailleur.

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The shifting is light years ahead of the others. Will this groupset make you ride faster? You could argue that it will, but I don’t think that’s the right question to ask. Will this groupset enhance the experience of your ride? 100% it will. It’s an absolute joy to use, and makes you want to shift more – plus, it’s easy to set up. It’s built to last, is robust, and strong, so you don’t really have to worry about it. Going off the reliability of the previous AXS stuff, which was - in my opinion - the best out there, this should be able to survive an apocalypse. I’m not normally the sort of person to fork out for an expensive drive chain. Instead, I normally run the cheapest I can get away with. Gen 1 of AXS started to change my mind about that but this new stuff has 100% flipped my view on it. It's something that's worth saving up for and putting on your next bike. It's something worth investing in. You won’t regret it.

 

Hat’s off to you, SRAM. Well done.

 

Words & Photography: Jake Hood


Review: Aeroe Spider Rack

Review by Odin Woods
RRP: $199
Find out more here.

“The Spider Rack system is comprised of a rear rack, rear cradles, front cradle, and some nice dry bag options to suit just about every bikepacking pursuit.”

When I think bikepacking, I think of drop bars, janky bags and loose straps hanging off every corner of the bike.

Some of those janky seat bags, front rolls and frame bags have become more refined over the years – to stop stuff bouncing, swaying, and ultimately falling off your bike – but there still isn’t the perfect solution for all occasions by any means. Consumers pushing for cleaner, simpler, less faffy ways of mounting bags on bikes continues to drive innovation. Innovators, like brothers Mike and Paddy Maguire at Aeroe, have certainly played their part in that move. You can thank them for the original freeload rack (now sold by Thule) – which I’m sure many of you have seen over the years – and now for the Aeroe Spider Rack system. The Spider Rack system is comprised of a rear rack, rear cradles, front cradle, and some nice dry bag options to suit just about every bikepacking pursuit. All the parts have a very modular feel about them, and you can tell each component has had a lot of love poured into it, design-wise, allowing for a very simple and easy-to-use product.

I’m kind of a ‘rip the packaging open first, read the instructions later’ person, and if how something is supposed to work isn’t immediately apparent then, in my opinion, it isn’t effortless for the customer. I applied this logic when first fitting the rear rack to my gravel bike and was quickly impressed with how simple and easily adjustable everything was. The mounting brackets can rotate to accommodate different seat stay angles and the rack itself can flex to achieve different widths. The rack height can also be adjusted +/- 30mm by loosening the four bolts and sliding it up and down through the mount to adjust the clearance around the rear tire. Nipping up the 5mm Allen key, the Silicone coated straps effortlessly tension up to keep the rack secure, without risking damage to your frame.

“I more or less forgot that there was a 12L dry bag strapped to the back of my bike. The rack was rock solid and didn’t make a sound.”

I pulled it off and within three minutes had it mounted on my Santa Cruz 5010. I chose to flip the entire rack 180° so the cradle sat back a bit further and lower down to clear my seat on compression. Aeroe note this as a ‘hot tip’ in their install guide.

It was time to put this stuff to use! We gapped it out of town to a quiet wee hut for the night and opted to use the Spider rear rack, with a single cradle, and the 12L dry bag to hump our gear up-river to the night’s accommodation. It was a quick transition in the pouring rain from empty bike to loaded bike. We simply clicked the cradle’s integrated buckles over the dry bag, then we were off. Jordan opted to mount his rack facing back as well, and had plenty of clearance over a 29er rear wheel as we bounced our way across tussock, river lands and the beech forest beyond. Without the usual constant swaying of a loaded seat bag, I more or less forgot that there was a 12L dry bag strapped to the back of my bike. The rack was rock solid and didn’t make a sound. When it came to dismounting and crossing some of the bigger rivers, I could fully drop my seat and climb off easily! Getting to the hut, it was nice to just unclip two buckles and not have to fumble around under the seat trying to pull straps through to remove a bag. My clothes and sleeping bag were nice and dry, courtesy of the super durable dry bags.

Loading up was, again, as easy as stuffing a bag full of gear and strapping it on. I gave my rack the once over just to see if anything had moved, but everything was where it was supposed to be and riding behind Jordan over some of the rougher sections of trail made me realise how little the entire system moved as well.

As mentioned, we only used the Spider rear rack with one 12L dry bag, but it’s worth noting that if you wanted to you could add another two cradles to each side and strap on another two dry bags – or a tent, fishing gear, whatever you want. One small thing to mention is that the straps that hold the rack on could be easily lost when the rack is removed, so putting a small rubber band around the end while on the rack would stop them being accidently dropped.

The weight weenies will note that the rack and cradle weigh in at 996 grams, not as light as a seat bag, but there is no questioning the robustness of the rack and cradles solid design. With that in mind, if you are planning to use this system for bikepacking, on rougher trails, it is reasonable to accept the 400-odd additional grams for the sake of longevity.

Rounding out, I found my time using the Spider Rack system sturdy and reliable with no surprises. For the price, I think it’s fairly good buying considering its versatility to move between bikes without too much hassle – plus, you can add to it when you need to.


This article is taken from:NZ Mountain Biker, Issue #109

Considering SubscribingPurchase Issue #109

Feature: Weekend up the Waiau

Words: Jordan Phipps
Images: Odin Woods

The idea of strapping crap to your bike and heading into the wilderness definitely isn’t a new one, but I’ve been feeling the urge to break out. Time to make the effort to get back outside, chuck down the tools and avoid the Christmas rush. Find fun in the misadventure and – for the first time, for me – take the bikepacking offroad.

The perfect opportunity to dip a toe into this niche practically landed in my lap. A long-planned weekend at the Wairoa Gorge was rapidly approaching, which would see me and my buddy, Odin, traversing the South Island. The journey from Christchurch to Nelson dances along the fringes of some unreal backcountry areas, giving us a plethora of rivers and valleys to explore. What better way to start a weekend of gravity-assisted riding than with a bikepacking adventure.

Driving to Nelson isn’t overly long or strenuous, but when schedules are tight and optimising time away from home is key, an after-work departure is best. Some folks may just opt for a hotel or even whack up the rooftop tent to break up the drive when tired, but when activities take priority, a backcountry hut makes perfect sense…

Stuffing a dry bag full of snacks, camping gear and the occasional hazy (of course), you’ve now got the perfect recipe to start any adventure. I’ve learned over the years, there are three things you usually like to line up to help aid a positive experience while out in the backcountry. None of them are exactly critical but a lack of all three definitely makes life slightly harder, colder and, ahh, less positive:

Good weather.

Ample daylight.

Cold beer.

A plan formed and before long we began the battle out of civilisation. Bumper-to-bumper rush hour traffic filled the roads, with the silly season undoubtedly upon us. Shop fronts were adorned with Christmas livery, and footpaths struggled to contain the masses. My mind begins to wander: have I got my partner the right thing for Christmas? Shit, did I remember to book the campsite for New Year’s Eve? Am I going to be able to pull off a flawless pav on Christmas Day? In my present reality, the only pressing questions were when the traffic was finally going to move and which flavour dehydrated meal I should have for dinner that night.

The slow crawl across the city only intensified the urge to get the hell outta there and be completely immersed in the wilderness. Eventually, the houses thinned out and the tar seal quickly turned to gravel. The inconvenience of the city and that pesky traffic became nothing but a smoke-fuelled memory.

The Landcruiser was loaded to the gunnels: two different disciplines and a weekend’s worth of supplies had stretched our Tetris packing skills. This was demonstrated almost as soon as we hit the first 4WD track – everything that could possibly fall off the shelves and create chaos through the interior, did. As bags collected our heads, we were forced to stop and rearrange, taking the time to observe the dank playground that sat in the valley below.

Alas, the peaceful serenity was momentarily broken by the sound of the windscreen wipers reaching Mach 10 on the Landcruiser. Cool, it was raining…

I downshifted the truck and let the old girl roll down the hill, headlights on as we watched the sun dip below the snow-capped peaks. The weather was packing in and the daylight running away, but hey – at least we’d made it outta the city. Plus, we still had beer.

Under the last ounce of light, we parked the old girl up, had a quick shuffle of gear, then strapped our dry bags down to their racks. With our head torches illuminating the way, our road had become a singletrack adventure. New to me for this excursion, was the Aeroe spider rack system. The simplicity of having a drybag strapped to the back of my bike while still maintaining use of a dropper post was a win indeed. With no movement or the admin of having to stop mid-ride and tighten anything up, this product got a thumbs up from me.

I’d never actually ventured into this part of the country before, but Odin assured me I was in for a treat. A narrow goat trail through tussock flat lands carried us away from the carpark and upstream towards the mountains. Navigating seemed a breeze… for the time being.

It’s strange, but for some reason I tend to always be overly confident in my navigational skills. There’s not really any skill set or valid reason to justify why, I’ve just always been the one to charge ahead and find the way. But, as it transpired, navigating from one small orange DOC marker to the next in the dark is a skill I’ve yet to learn. Toppo maps came out and assurances were made that as long as we were heading upstream, eventually we’d reach the hut. Right? Oh yeah, and technically ‘upstream’ also means ‘downstream’, ‘back across stream’ and ‘across that other stream’, too.

We were, by then, doused in darkness and navigating river crossings, however, the dedication to sustaining dry feet was strong. Our shoes stayed firmly strapped to our handlebars, and socks tucked in our pockets – a decision I questioned as my bare feet felt helplessly for the path ahead, fumbling over rocks and navigating the murky waters one dainty step at a time. It was about then that I reminded myself; ‘it’s not the destination, it’s the journey’. Or was it #notallwhowanderarelost? Either way, the realisation that only a few hours previously I was slinging tools at work and watching the hours slowly tick by, yet now here I was immersed in the wilderness, wading upstream, bike in tow, pushed me further into the unknown.

I don’t know about you, but to me, that’s pure bliss.

Our chosen abode for the night happened to be placed on the Te Araroa trail. We started to broach the subject that there was every chance the hut would be chocka block full of other intrepid travellers, and the question arose of whether we would be pitching our tent in the rain? What was proper hut protocol when arriving late at night? Ah well, I decided that was future Jordan’s problem, and kept the pedals turning.

This was night riding like I’d never experienced it before. To be fair, it was more a combination of multi-sport, orienteering and cycling all thrown into a mixing pot of Type 2 adventure. Mental notes were made on which sections to avoid on our return ride through, and which rock cairns were actually helping us. Somehow, it seemed that each time we’d battle our way through an off-piste excursion, we were only ever metres away from the trail.

Finding ourselves on opposite sides of the river, we reconvened to once again check our course. After a couple of hours of fumbling athletically through the dark, we had success – the hut was in reach and the legs could sense it, so we cranked up through the dank beach forest and summited the last climb. I soon found myself yahooing, taking in the cornflake descent, corners getting slapped, and any feeling of tiredness seemingly having left my brain.

Sliding to a stop, we couldn’t believe our luck – checking, then double checking, then triple checking that we did indeed have an empty hut at our disposal. Yes, an empty hut! We couldn’t believe it; our intrepid trail of cornflakes had led us right to the front door and not a soul was in sight. Our bikes were safely tucked away and, with two simple clicks, my dry bag was released from its cradle. Ahh, that first crispy beer was cracked.

Hut life is an easy life – not to mention, a much-needed change of pace from the standard 9 – 5 back home. It’s the simple things for me: the rhythmic crackle of a fire and the anticipation of a dehydrated meal. We were more than content. This was a heck of a way to spend a Thursday night. With the fire cranking and beverages poured, the quality of our chat started to fade and it wasn’t long before the night slipped away.

The beauty of arriving at 11:30pm the previous night was that neither of us actually knew what to expect of our surroundings when we woke the following morning. Our subpar porridge was inhaled while glassing the numerous slips and clearings, adamant to scan some creatures. This trip, as all of them seem to be these days, was a squeeze in our schedule. It was the sort of trip that, at the time, could have felt rushed and a tad flustered, but that’s when it’s key to remember something like this is always worth doing.

After a morning scanning and exploring the terrain, our bags were back on as quickly as they were unpacked, ready for the downstream trip – which we expected to be an absolute treat. I was quickly humbled by how off track my self-proclaimed mastery navigation skills were the previous night, as the amount of river crossings were halved. The sheer vastness of the valley was hard to absorb.

On any adventure, every positive is balanced with a – sometimes – a small negative. The small negative on this trip was the kind that liked to fly around our faces and bite any exposed skin. Sandflies weren’t going to put a damper on this trip, but boy did they give it a nudge. Luckily for the sandfly population, the majestic sight of the Landcruiser was on the horizon. We’d managed to make it back to the truck in half the time and almost half the distance we’d covered the previous night, but both exploits were just as fun.

Sometimes life needs a bit of spice. Not necessarily the whole Cajun vibe, but maybe more of a paprika hit. It doesn’t take much to mix it up and get out of your environment and into another. Squeeze it in the schedule and get it done. You might be surprised how enjoyable a moonlight ride upstream in the rain actually is.


This article is taken from:NZ Mountain Biker, Issue #109

Considering SubscribingPurchase Issue #109

Bike Review: Trek Fuel EXe

This is a review of the Trek Fuel EXe, a great example of a new category of mountain bike.

 

It will not be like any review you have read before. To be honest, there is not much point in rattling off the geometry, the parts spec, the wattage and the torque figures. Anybody who is remotely interested in this bike has already watched a dozen in-depth videos, and people moderately interested probably know more about the kit that comes on each model than I do.

 
 

The exact version I got to test is not even available in New Zealand, so I am not going to pick that apart in much detail either.

 

What I am going to try to do is relate how this bike has affected me, and what it has meant to my bike riding. My last year or so has been so weird and life-changing that I have been planning to write a story about it, and this bike has come along at the right time to get me started.

 

Some context: I took up mountain biking almost 40 years ago. I had taken a few years off bike riding after I threw in the towel on my track racing career, and got sidetracked by learning to be a designer. I didn’t really miss bike riding until I saw my first mountain bike. I bought the first one I saw that was for sale.

 

Since then I have slowly worked my way through many kinds of bike riding. Six-week bike packing trips, cross country races, downhill enduros, a short stint on a BMX, over 20 laps of Lake Taupo on various road bikes, single speed races, 24 hour races, multi-day mountain biking expeditions - I even ended up back on a velodrome.

 

I have always been able to ride enough that if any of the above activities came along I could select the appropriate bike and have a go at it. Even as I got older, fitness was never a consideration - I could get away with going on any of these outings without any need to prepare.

 

2020 was one of my best years since bike riding once again became my thing. A weekly fang on the track bike, an unusually mild winter for mountain biking, some great days out on the gravel bike, then two trips to the South Island for long weekends riding legendary trails in great company.

 
 

Come February that summer, a swelling in my neck became a major health problem. I was very lucky - what I had was treatable. The treatment was pretty heinous.

 

So this story is about what it means to be a bike rider who is fairly capable, rendered completely incapable in order to stay around.

 

Treatment lasted seven weeks, plus another six or seven in a bit of a mess, and as many months in a much reduced state. On the plus side, I got down to what was my 1977 racing weight. On the down side I was weak as a kitten and needed to sleep a lot.

 

I started back on regular food about a month after treatment, and got the last of the tubes that were installed taken out a couple of weeks or so later. I had my first bike ride post-illness about then, and managed ten slow kilometres on the flat. With some half-hearted wheelies and skids.

 

Over the next few months I got better at bike rides, got busy on some landscaping projects, and tried to remember what I do for a living.

 

My specialist, to whom I owe the success of the treatment he designed, happened by chance to also be a mad-keen bike rider. Bizarrely, he ordered a product from our online business the day before our first clinic, quite by coincidence. He understood what I would be trying to do when I got back into it. He encouraged me, with a round of cautions. Don’t expect too much, you won’t be like you were before, and get yourself an e-bike.

 

I sort of listened, but mainly figured if I ate a lot and was patient I would get back to normal eventually.

 

I didn’t get an e-bike.

 

I slowly added kilometres to my distance covered and metres to my altitude climbed. By six months out I could do a decent three hour ride in the trails, and climb up to the best bits under my own steam several times in a ride. I was probably back to being ok for my age, regardless of being in recovery. So, pretty good.

 

My problem was a ride like the one described would lay me out for several days. I might not get back on a bike until midweek, if at all. My old coach used to say “a little, and often” was the best formula. I didn’t follow that adage, I went out and did the ride I really wanted to do, smashed myself, then took days to get over it.

 

That was my status when I got the chance to do a long-term review of the new Trek Fuel EX e.

 

Getting acquainted with the bike was very easy - my daily ride is a Fuel EX from 2021. The e-sled shares that DNA, and is a logical development of a model that has been around in the Trek range for seventeen years.

 

It looks really good. Whether you like the look of a bike is obviously a matter of personal taste, and for me it is one of the best looking mountain bikes of any kind, ever. The design of the full-carbon frame is considered and resolved. That it is electric assist is irrelevant, it is a good looking thing.

 

The initial thrust of the bike industry’s e-bike thinking was to give riders heaps of grunt over a long day out. Like, if we want to sell any of these things we have to make them go as far as any of our customers will ever go, even if they only go that far once a year.

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

 

 

 

 

 

 

 

 

 

 

 
Well, OK. But that means riding a big, heavy beast on all your outings. The Fuel EXe weighs in around six or seven kilograms less than its full power brethren, and the electrics are packed into a much smaller part of the bike.

 

The motor and electronics from German robotics company TQ fit into a slightly enlarged bottom bracket casing, and under a neat little display buried in the top tube. A discreet pair of switches next to the left grip controls the system.

 

Whether it matters or not to the general populace, it doesn’t look like an e-bike.

 

On my first ride I met some people I know at the top of the trails, about to head into the jungle. One of them came and had a good look at the bike, which certainly is attention-grabbing with its one piece carbon bar and stem, honeyed butter-coloured frame and electronic gizmos on the suspension and valves. We chatted about it. We rode more or less together to the first junction on the trail. Later that day I posted a photo and a few notes on Instagram and my friend messaged to say he had not even realised the bike was an E.

 

The other thing that really stands out on the EX e is the noise it doesn’t make. If you are used to hearing what sounds like a blow dryer coming up the trail, you will be surprised by the silence of this bike. Honestly, I struggle to hear it over my tinnitus.

 

It does emit a bit of a whine when it is really under load, but even that is usually smothered by tyre noise and heavy breathing.

 
 

Which brings me to next part of my story - what the Fuel EX e is like to ride.

 

It feels like my regular Fuel EX. The motor is not engaged with the cranks when it isn’t driving, so riding the bike around with the system turned off just feels like a normal bike. In factory default settings, the Low power mode feels like a normal bike might feel to Anton Cooper. The way the power comes on is very subtle, almost imperceptible, you just feel a lot stronger than usual.

 

That is where the heavy breathing comes in. In Low power, I was working as hard as I normally would, or nearly as hard, just going faster. It isn’t at all like the full powered bikes I have giggled my way around the trails on. If you don’t punch the power up you still have to earn your turns.

Mid power offers more of a surge at the pedals, but is still fairly muted and gentle. Full gas is definitely a big boost, but nowhere near the rowdiness of the Rails or Levos I have ridden.

 

And going hard on the power will rinse the battery fairly quickly.

 

I started a lot of my rides with a 150m, one and a half kilometre, singletrack climb. Low power would see me use seven or eight percent of the battery charge, high power double that.

 

By riding nearly everywhere in Low power, I squeezed 49 kilometres and 1350m of ascent out of a charge.

 

On another day, using a bit more throttle here and there, I got 40ks and a little over 1000m vertical.

 

But for this bike and me, the sweet spot was about 35 kilometres of trail and around 800 up. At that distance and elevation gain, I could ride the entire distance on Mid power or Full power, which is at least 37% more fun, and get a really good workout at the same time.

 

On the example I had, with its 150mm RockShox Lyric fork and RockShox Super Deluxe Ultimate (seriously, that is what it is called) shock working at their best, it was a real pleasure on the trails. Going downhill the bike was quiet and predictable. And quiet - it will be interesting to get astride one that doesn’t share the AXS shifter and seat dropper of the review sled. I wonder if having two less cables makes the bike less clattery, but honestly the only bike I have been on that made less noise was a single speed.

 

One of the interesting aspects of the motor is the lack of drag. On some other e-bikes, once you hit the built-in speed limit, you go from having considerable assist to having the drag of turning the motor over. This one completely disengages, so you dont feel like you are fighting anything.

 

Another aspect of the lower power of this bike compared to the full-on versions, is that the rider is rewarded for maintaining a good cadence. For me, a pretty fast spin seemed to be the way to get the best out of the motor, I found myself changing gear maybe more often than usual to keep the revs up especially on flat or climbing trails.

 

And that right there is the real beauty of e-bikes in general, for me anyway. Trails that are a bit of a chore become a lot of fun. There is a favourite of mine in our local patch called Old Chevy. It is three kilometres of tight singletrack, with 49 metres of ascent and 78 metres of descent. It is full of short pinch climbs, and fun but very quick downhills, connected by contorted trail. Like I said, it is one of my favourites, but it always hurts. I am sure it is fun for the very fit, but now I KNOW it is fun for the electrically assisted. And on the EX e, it is fabulous. Coupled with enough torque to make the climbs fun to attack, the light and natural feeling of the bike means the downhill and traverse sections just feel like you are having the best day on a bike, ever, fitness wise. Every time.

 

And that brings me to the effect having this bike for a month has had on me.

 

As my specialist predicted, access to an e-bike has been a big help. I can go out on consecutive days, and give it what feels like a decent serve. I have ridden the bike much more than I was riding my bike before, and while the assist obviously makes that easier, the extra riding is putting kilometres in the bank and the benefits that brings.

 
 

I have done a couple of rides on my other bikes during the month of the EX e, and they have been the longest and hardest since I got going again. A big ride on the roadie, in the wind and rain, which incorporated a decent chunk of forest gravel, and a week later a long mountain bike ride all over the forest - neither one made feel anything other than satisfied. I could ride again the day after both outings, and did!

 

So not only did riding the EX e get me out more often, it added to my ability to get out more often.

 

That is a big deal from my perspective. I feel like I am more or less back, if not to normal (what exactly does that look like?), at least to a stage where I am up for whatever kind of bike ride presents itself. Like I was before I got hammered.

 

I have figured out what it’s good for. And who it’s good for.

 

It isn’t the guy who overtook me the last time I took the regular bike out. He came past me on a big climb, seat about ten centimetres too low, gear about four sprockets too high, shorts maybe a size and half too small. On a big e-bike, motor hauling him skyward while he pedalled with feet akimbo, heels on the pedals. He would not like the EX e, he would feel short-changed by its comparatively low power package.

 

But a mountain biker, looking for a way to cram more riding into a busy schedule, or get a decent ride in when not at peak fitness, or maybe a person on the rebuild trail, I can’t recommend the bike enough.

 

Trek sells a range extender, which sits in the bottle cage and provides an extra 40% of range. Well, “up to 44%”, according to Trek. I will get one, when I get my own Fuel EX e.

 

There, I said it. When I get my own Fuel EX e. It’s that good.

 

Words: Gaz Sulivan

Images: Savanna Guet

 

Feature: Reefton Electrified

It’s Wednesday night and the weekend weather forecast at home in Christchurch isn’t looking too flash. Frankly, it’s looking like a winter weekend indoors, which is not going to fly. Two friends are keen to ride, and both itching for a mission after a big work week. With a few days to plan, a quick Google and Trailforks search, what about across the divide? We had heard rumours about epic singletrack in lush beech forest, untouched by time. The rumours and online presence are vague enough that there’s still some mystery about the trails -enough to push the intrigue and excitement up towards committing to check it out. A weekend warrior mission to better weather on the other side of the Alps, to the wild West Coast, in search of new trails unridden and maximised riding time. With a twist to our usual bike adventures, this time we’d be electrified. It might have been a gamble, but as the region’s history goes, we could end up striking some gold.

 
 

Reefton, located on the South Island’s West Coast, may be small in terms of population (927 people at the last count) but it’s always been ahead of its time; big on technology and innovation. A gold mining town established in 1870, Reefton was the first place in the Southern Hemisphere to have a public supply of electricity – beating even London and New York to the switch in 1888 – and the first to have an electric street lighting system. Pretty mind-blowing to think this sleepy West Coast town was a pioneer before the world’s major cities. Given all its history, it’s more than fitting that Reefton should now be experiencing an electrified renaissance and quietly becoming a must-visit eBiking destination.

 

Surrounded by the Victoria Conservation Park, with 180,000 hectares to be explored, the mountain bike trails range from Grade 2 for beginners to Grade 5 for the more experienced. It’s a stunning setting and you can’t help but enjoy the rugged beauty of the place as you make your way along old mining trails and up through ancient beech forests. Time could well have been standing still for the last hundred years or so, everything feels so untouched, and the old mining relics left lying around are a constant reminder of the history of this region and its tough, pioneering spirit.

 

Kirwans Track is one of the best-known trails and the main draw card bringing mountain bikers to the town but traditionally it is the domain of the hike-a-bike enthusiast with an overnight hut stay that requires the unique kind of endurance and commitment which can be hard for your average weekend warrior to muster. A long, steep Grade 5 track, gruelling on the uphill, technical on the downhill, Kirwans has a hardcore reputation which, in the past, had many riders choosing to skip the climb and take a helicopter to the top. And then came another ‘lightbulb’ moment: this place is perfect for eBikes.

 
 

 

 

 

 

Don’t get me wrong, I don’t actually mind a steep climb - or even carrying my bike from time to time - that’s just the price you pay to get to the best tracks. But, for this particular mission we’d be riding the whole way, thanks to a couple of Bosch-powered Moustache Game 9 and Game 8 bikes we were lucky enough to have at our disposal for the weekend - they’re just the right tool for the job.

Like a lot of mountain bikers, I like an adventure and when the crew and I go on trips, we tend to look for destinations or trails that offer a few challenges, whether it be the technicality of the riding or the difficulty in accessing it. Reefton has tended to be the kind of place we just keep missing; with opportunities closer to home like Craigieburn, or up to the north and down to the south, we rarely stop to explore the pockets in between. But along the way we’d heard lots of murmurings both about how good Kirwins is, and about Reefton being a cool little hub for accessing other trails and some unique natural spots. Finally, the stars had aligned to make the mission to Reefton happen.

We loaded up on Friday afternoon, heading straight out of Christchurch for the hills and through the Lewis Pass. Coming through the pass and arriving at Reefton, you can see the rolling hills coming down from the Alps and why this terrain is built for riding.

 

 

 

 

 

 

As it happens, there was a major flaw in our plan: Kirwins was closed, another victim of the extreme weather events of recent months, and impassable thanks to multiple slips and tree falls. While we were disappointed not to be able to take on this beast - we’d come well equipped for the job after all – there turned out to be a silver lining as we were forced to seek out another place to ride. These hills have turned up gold before and, in our case, it comes in the form of a different, but equally testing, spot called Blacks Point.

Only a kilometre or so out of town, Blacks Point offers up some classic old-school mountain biking in all its raw and rugged glory. We found ourselves getting lost and having to find our way again; it’s hard, it’s steep, and it’s super gnarly with 550m of elevation gain straight out of the car park. It’s also super fun on eBikes.

The main track goes upwards for about seven kilometres before splitting off at the top and running back down. It would be fair to say that on an analogue bike there’d be a fair bit of pushing, grovelling and sweating, and either wishing you’d packed a second sandwich or stayed behind to check out the Reefton Distillery instead. On this day, however, we had assistance from the Bosch eMTB mode, which helped with hitting the right cadence to get to the top and makes the climb enjoyable. The Performance Line CX motor worked quietly below, giving us the assist needed so the uphill was not so much of a grind. I still got the heart rate up, without destroying my legs.


Video: A new view of the Old Ghost Road

Old Ghost Road, Lyell, Mokihinui River, Westport 85km one way | Advanced Tramping, Grade 4 Mountain Biking

 

One of the esteemed Great Rides of New Zealand, the 85km-long Old Ghost Road is Aotearoa’s longest single-track backcountry trail, and one of the most incredible multi-day backcountry experiences in the country. The adventure takes riders and trampers back in time along a shared-use and long-forgotten goldminers’ road.

 

The new ride-through safety video, launched today, was produced by the NZ Mountain Safety Council (MSC) in collaboration with the trail’s creator and operator, the Mokihinui-Lyell Backcountry Trust. The video guides visitors through the amazing trail and is packed with advice on how to get the best experience out of the trail.

 
 

This impressive trail weaves through ancient forests and diverse rugged alpine environments. Combined with the infamous West Coast weather; frequent heavy rain, strong winds, snow, and freezing temperatures, even in the height of summer, means the Old Ghost Road is a true adventure.

 

The new video highlights the varied conditions mountain bikers can expect, covering important tips including how to pack a balanced bike, a suggested packing list, the common risks and hazards, and key decision-making points and pit stops.

 

Plan My Walk by MSC can help those planning to tackle the Old Ghost Road as it includes the new video any relevant weather alerts, a weather forecast, and bikers can use the gear list and then create a trip plan to share with a trusted contact.

 

MSC would like to acknowledge and thank Ngati Waewae for filming in their Takiwa.

 

Watch the video here:


Release: The New Fast – Bosch Presents Drive unit for eMTB Racing

In eMTB races, fractions of a second decide whether you win or lose, and you need the best equipment. Bosch have answered the call with their new drive unit, the Bosch Performance Line CX Race Limited Edition.

 
 
 

Developed with professional athletes, Bosch's years of experience from numerous eMTB races have gone into this drive unit. The specially developed Race mode, uncompromising support and low weight are the ideal features for new record times. The Performance Line CX Race Limited Edition unleashes its full potential on tough routes with difficult technical sections, almost unrideable uphill sections and challenging descents.

 

"As a passionate eMTB rider myself, I know exactly the pain, effort and excitement on the trail," explains Claus Fleischer, CEO of Bosch eBike Systems. "This is why I am particularly proud that our technology enables athletes to compete even more successfully. The eMTB sector is becoming more and more professional worldwide, and we actively support this development."

Mountain biking is deeply rooted in the DNA of Bosch eBike Systems, one of the first eMTBs was equipped with a Bosch drive system back in 2010. Since then, the company has consistently developed more products for eMTB riders. The Performance Line CX was the first eBike drive specifically for eMTB in 2014, and the 2018 eMTB mode continues to set the standard today. Just recently, the new Extended Boost and Hill Hold features have been added, making the eMTB experience even better.

 

In recent years, Bosch eBike Systems has played a decisive role in eMTB racing, as evidenced by more than 60 podium finishes in eMTB races around the world this season alone. But the commitment goes beyond product development. The company has played an active role in shaping the emergence and professionalisation of the sport and has been instrumental in creating the right framework for professional races such as the Enduro World Series (EWS-E).

 

Kiwi rider Joe Nation had his first season on the EWS-E this year riding a Pole Voima equipped with the Bosch Performance Line CX motor.

 

“The new CX Race motor is really fast! It has the same Bosch power but the extended boost on the race mode really helps to climb over features where I am unable to pedal. Plus, it’s lighter which is always better when it comes to eBike racing!” says Joe.

 
 

The Performance Line CX Race Limited Edition is an exclusive evolution of the Performance Line CX. The new Race mode offers energetic, direct support – with up to 400 percent of your own pedal power. Riders reach maximum support faster and can use it to the cut-off at 32 km/h.

 

The familiar Extended Boost of the eMTB mode has also received an upgrade. The extra thrust is further extended in Race mode, so that large boulders, roots or steps are easier to manage. Strength of support, dynamics, maximum speed and maximum torque can also be adjusted in the eBike Flow app.

 

At 2.75 kg, the new drive unit is the lightest drive in the entire Bosch portfolio. This reduces the weight of the bikes equipped with it and optimises the handling of the eMTB on demanding trails, but with 85 Newton meters of torque, it still offers maximum power for acceleration out of tight corners which can be a decisive competitive advantage. Even at cadences over 120 rpm, the powerful motor provides explosive support so aggressive riding over long stages and fast sprints are possible.

 

The race character of the Performance Line CX Race Limited Edition is also clear in the design. The drive unit can be perfectly integrated into a sporty, slim frame design and makes for particularly agile handling.


Review: 100% Trajecta Helmet

If you’re racing enduro, you are often faced with a bit of a dilemma when it comes to helmets. Do you wear your downhill full-face helmet? Or stick with your regular open face? Full-face helmets are by default, a lot hotter and heavier - but there is no denying the extra protection that you get from having proper chin and cheek protection. Having to wear a full-face helmet all day – with all the climbing you inevitably do - is a deal breaker for some; the sense of overheating outweighs the benefit in protection. But, what if full-face helmets were lighter, breathed more, and still gave you all the protective benefits? Enter the 100% Trajecta, which does just that.

The Trajecta is a modern, enduro-friendly full-face that seeks to offer all the benefits of a traditional full-face in a lighter weight and more breathable package. What’s apparent even before you put it on, is the massive vents designed into the chin bar. I have owned plenty of full-face helmets over the years and, while they all had vents around the chin bar, none of them come close to the amount of open space the Trajecta has.

 

Safety wise, the Trajecta has its own Smartshock® Rotational Protective System, designed to act as a version of the MIPS system popularised by other helmet manufacturers to reduce the severity of oblique, angular impacts that produce both rotational acceleration and deceleration forces on our brain. Taking the liner out reveals some blue elastomers moulded into the main polystyrene body of the helmet, and these are what the liner connects to. The system improves protection by immediately compressing and absorbing direct impact, and allows the elastomers to move independently from the helmet's shell. Both features help reduce energy transfer to the brain over a wide range of speed and impact types.

 
 

Style is a personal thing, but I think the 100% gear always looks on point. The Trajecta has the super aggressive moto look about it and just looks fast. I tested the matte black option, but it is available in six other more colourful options too. Weight wise, the Trajecta weighs in at 860gm (size medium) and feels light in your hand and on your head. Regarding fit, I find I sit on the cusp of a medium and a large. Testing the medium, I found it was just on the tight side and I would go up to a large if I was doing it again. Each helmet comes with a spare set of pads so you can customise your fit, however the medium came with a thicker set of pads that would have resulted in a tighter fit still. There isn’t too much margin when it comes to full-face helmets so it is something I would try on in a shop instead of ordering online.

Out on the trail, I began to really appreciate the gaping vents in the chin bar. They create airflow like no other full-face I’ve worn, and I definitely found my breathing more natural than the huffing and puffing I usually end up doing when wearing my downhill helmet. No surprise, but worth mentioning, the helmet shape around the main opening sits great with my goggles and they didn’t seem to interfere with each other.

 

 

Could you ride in this helmet all day? Yes, definitely. Is it hotter than a regular helmet? Yes it is. But can you live with it? Well, I rode this helmet during the changeable weather of spring, and on the odd colder day I really appreciated wearing a full-face - it takes the chill off nicely. I didn’t get a chance to ride it on a full-on summertime scorcher, so it’s hard to tell just how it would feel then. For all bar mid-summer, I think I would be pretty comfortable in this temperature wise, but it really comes down to what you’re setting out to do on your ride. If you’re just smashing out an XC loop of the forest then no, you’re not going to wear this. But, if you’re doing a few shuttles, or doing a more skills-based day where you might be working on a particular jump or drop, there’s no reason to wear an open face. Save your pretty teeth! Personally, I’ve got a few enduro’s I’m tentatively booking into the calendar, and I think this will be my helmet of choice. I believe this will be a helmet that really appeals to those riders who go a bit of everything, the odd DH race, the odd enduro, the odd just mucking-around-on-some-local-jumps and, while regular downhill helmets no doubt offer a greater level of comfort and protection, if you are only going to have one full-face helmet, having one that you will actually wear on a larger variety of occasions surely means there is a greater likelihood that it will actually be on your head when you need it. For that reason, I think these are a great option.

Words: Lance Pilbrow

RRP: $449


Review: 100% Tarka Body Armour

You don’t have to be in this sport long to know that there is some real potential to hurt yourself. In fact, if I’m away on a group ride for a weekend I almost always assume someone will be going home with a body part in plaster, a sling, on crutches, or all three. My own X-ray file is proof of all of this, so I’m a big fan of riding within my limits these days and, if I want to push them, I will only do so when I’ve armoured up.

 
 

Lots of people own the requisite full-face helmet, elbow pads and knee pads, but fewer people opt to go for a chest and shoulder protection system like the 100% Tarka. And that’s understandable. Chest protection is kind of another level of hassle and has tended to be uncomfortable to wear, bulky and awkward fitting. The Tarka seeks to address some of these issues.

 

The Tarka is available in three versions: a vest (chest and back only); a short sleeve (chest, back and shoulders); and a long sleeve (chest, back, shoulders and forearms). We tested the short sleeve option. The Tarka features unique ‘Smartshock’ material in all three impact zones, and is impact tested and certified to the highest level of CE impact protection. The Smartshock panels are a blue, impact resistant material that look a little like they are made from camping pad foam, albeit a fair bit firmer and, on the front and back, there are three of them stacked on top of each other. They are malleable yet firm. How firm? Well, I think you could hit a rock at any speed and if it hits you in the blue zone - that zone will be the least of your worries. All Smartshock plates are removable, so if you just want the back protection, you can remove the chest protector for example, which also means you can easily wash the vest to keep it fresh.

 
 

Fit wise, it is slim. I would err on fitting up a full size from normal, but once it’s on it's comfortable enough. Some other body protection I have worn seemed to itch from the get-go, but this felt fine. I didn’t need to wear a liner shirt underneath generally, but some people might. Silicone logo grippers on the lower hem also keep it from riding up your back too. All the blue panels are ventilated, and the material of the body is a breathable mesh. Don’t get me wrong, wearing body armour is still warm, but this breathes about as well as you can expect from this kind of product. On the trail, I was impressed with the free range of motion, it never really felt ‘in the way’ like some armour can. It’s definitely a solid piece of kit, so much so that I’m not going to put it on for a regular trail ride but, if I was spending a day on the shuttles or a gondola, it’s something I would definitely take. It’s got enough heft to it that I think the target market is much more the gravity/DH crowd, rather than trying to add a little bit of protection to your everyday trail riding. Basically, I think if I was doing something where I was planning to wear a full-face helmet, I would take this too.

 

At $399 it’s a wee bit of an investment, but it’s cheaper than time off work when you injure yourself or when you have to take care of your young grom who’s smashing out laps on the bike park, trying to be the next Blenki or Bulldog, but ends up smashing themselves. I also think that wearing appropriate protection for the risks that are taken in our sport is not only common sense but, really, it’s about being a good citizen too. So, if you’re taking risks, suit up, your future self will thank you for it.

 

Available through FE Sports.

 

REVIEW: LANCE PILBROW
DISTRIBUTOR: FE SPORTS
RRP: $339


Beer Guide Issue 207

It’s a different gold rush in the south these days, as Queenstown and Wanaka together boast more breweries per capita than anywhere else in the country.

During the gold rush era, the Central Otago region boasted the highest number of breweries in the country. Beer was a natural companion to slogging it out under the baking sun, or in the freezing cold, as you tried to make your fortune.

But it’s a different gold rush in the south these days, as Queenstown and Wanaka together boast more breweries per capita than anywhere else in the country. Plus, there are plenty of great pubs to boot.

Alexandra itself is home to Ferris Road Brewery, located not on Ferris Road, but Ngapapa Street. Owner-brewer Sam Forsyth always has an array of guest taps, as well as his own beer, and the place is well regarded for its wood-fired pizza.


Ferris Road has the claim of being the first brewery in Alexandra since Theyers & Beck’s closed in 1880. It’s a block away from the Otago Rail Trail at one end, and the Matangi Station mountain bike track is at the end of the road, so it’s an ideal spot for cyclists to stop in. There are 14 taps, and Sam says his best-seller is his Trail Ale APA.

Up the road in Clyde, the famous Oliver’s restaurant has its own in-house brewery, the Victoria Store Brewery, and the beer of choice is the Black Smith Porter, which is smoothly chocolate but with a hint of smoked malt.

The brew scene in Queenstown is led by Altitude Brewing, located on the water at Frankton, not far from the airport.

It’s a gorgeous spot at any time of the year, and new outdoor heating makes the friendly taproom the perfect place to spend wintry nights. Altitude won the champion small brewery title at the 2021 Brewers Guild of New Zealand Awards, and they’ve got great local connections with the local ski fields.

They’ve also just done a collaboration with Royalburn Station owners, Nadia Lim and her husband Carlos Bagrie, to make a beer using barley grown on Lim and Bagrie’s Arrowtown station. With the addition of locally sourced hops and water it’s a totally Queenstown-brewed Italian pilsner.

Altitude’s flagship is the Mischievous Kea IPA, a malty, English style IPA that’s perfect for the cooler weather. But check out their Sled Dog hazy and whatever fruited sour is currently pouring in their Jam Sessions series.

At the time of writing, Searchlight brewery in Queenstown was in the process of getting new owners — it is being taken over the by the team that run The Beech Tree bar and restaurant in town. Searchlight are best known for their Ladies of Dogtown Hazy Pale Ale that won them an award for the label design in 2021. The label features local Queenstown female skaters and the beer has an attitude to match, with lots of sweet lime and grapefruit.

Perched above the Shotover River and right next to the famous Shotover Jet tourist attraction, the aptly named Canyon Brewing produce a great range of tasty beers, and there’s an excellent restaurant to boot. Their most interesting beer is the Zenkuro Dry Japanese-style lager that’s made with kasu (which is a byproduct of making sake), yuzu and the Sorachi Ace hop, which brings a dill-fennel flavour that helps create a lemon-savoury style beer that tastes amazing after a hard ride.

Cargo Brewing is located in Gibbston Valley wine country, with the brewery inside a vineyard. And they’ve recently opened a taproom at Arthurs Point, called Cargo at Gantley’s — Gantley’s being Queenstown’s oldest pub. For a perfect winter drop try the choco-coffee porter.

In Queenstown itself, the place to go for the best range of beer is Smith’s Craft Beer House. It’s a fantastic spot, with great food and from late June will have a line-up of the best New Zealandhopped beers as part of their annual NZ IPA Challenge.

Across the Crown Range, Wanaka is bustling with good beer from B Effect, Rhyme X Reason, Ground Up and Wanaka Beerworks.

Rhyme X Reason and Ground Up are both located on Gordon Rd.

Rhyme X Reason’s rustic taproom ticks all the boxes. Shared wooden tables are especially popular with locals after work and on weekends. There’s an impressive range of cool merchandise, and an ongoing schedule of food trucks partners the brewery’s core range and regular seasonals. There’s an array of interesting beer but the current cult favourite is Calm Down Karen, a hoppy IPA that delivers heaps of flavour with its political commentary.


Ground Up
are a real mountain culture brewery and make some of the most underrated beers in the country. ‘Punks in the Gym’ might create images of gym-rats lifting dumbbells but this IPA is named for a famously challenging sport climbing route in Australia. Famously, New Zealander Mayan Smith-Gobat was the first woman to conquer the grade 32 Punks In The Gym climb at Mt Arapiles in 2012. Crux Pilsner is named after one of the hardest climbing manoeuvres, and it’s a great beer to boot. The food comes courtesy of Wanaka ‘Wich Project, who serve up a menu of American sandwiches, bar snacks and desserts.

B Effect are deeply connected to the mountain biking scene in the area, through their relationship with Bike Glendhu. The beer of choice post ride is Hero Dirt APA and while Wanaka Beerworks might be one of the oldest craft breweries in the country, established in 1998, the foundation Brewski Bohemian Pilsner is tasting as good as ever — and for the health conscious, it’s also officially now a low carb beer.

There are other great beer pockets in the area including the Dark Horse Brew Werkz brewery located at Omakau’s Commercial Hotel, which dates back to the 1880s and is full of historic charm.

And Arrowtown Brewing, while they don’t have a taproom, is worth checking out as it’s a business started by an assortment of friends that include The Exponents bass player Dave Gent and Navman founder Sir Peter Maire. Their beer can be found at Arrowtown’s Fork & Tap and other establishments in the town. •

 

Words: Michael Donaldson
Photography: Henry Jaine,
Cameron Mackenzie and Callum Wood